SPOT Trace
SATELLITE TRACKING DEVICE
Obtenir de l'aide
Documents
Micrologiciel
DERNIÈRE VERSION DU MICROLOGICIEL
Date de mise à jour2023-01-18
Version du micrologiciel
2.0.2
Programme de mise à jour du micrologiciel
2.9.3
Mettre à jour le micrologiciel >>
Assistance pour le SPOT Trace
Équipement
QUESTIONS ET RÉPONSES
SPOT Trace Mounting and Installation
The orientation of the SPOT Trace when installed may have an impact on the performance and consistency of the device. For the best reception, always mount or install the unit with the SPOT logo directed to the sky. The internal satellite antenna is located beneath the logo. If using line power, ensure that the unit will be installed within proximity of your power source. You may install the reversible mounting bracket using the included: Double-sided industrial strength tape Adhesive grip pad Adhesive hook and loop tape. Then, place the SPOT Trace in the mounting bracket. The device will transmit through fiberglass, fabric, and glass. Reception may be inhibited due to hills, buildings, metal roofs, or other obstructions. We strongly recommend experimenting and testing your device in the desired installation location before semi-permanently installing.
How do I replace the batteries in the SPOT Trace?
To replace the Energizer® AAA Ultimate Lithium™ or Energizer® NiMH batteries installed in your SPOT Trace, please follow the steps below. With a Phillips-head screwdriver, unscrew the 4 enclosure screws keeping the two halves of the SPOT Trace together. Carefully separate the two halves of the SPOT Trace by evenly separating the two halves of the device. If the two halves are separated unevenly it may result in damage. Remove the expired batteries and replace with new lithium or NiMH batteries Ensure batteries are oriented correctly. Combine the two halves of the Trace evenly and hold a firm grip at the center of the unit while screwing unit together An amber light will appear for approximately 5 seconds, then the LEDs will display the power on sequence – both the power and satellite LEDs will flash. Common Issues The power LED is flashing or solid red after replacing the batteries Unscrew and separate the two halves of the SPOT Trace. After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half. If you continue to receive red LED lights after repeated attempts, please contact SPOT Customer Relations for further assistance. Amber light will not turn off after replacing the batteries Unscrew and separate the two halves of the SPOT Trace. After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half. If you continue to receive a solid amber LED light after repeated attempts, please contact SPOT Customer Relations for further assistance.
What is the estimated battery performance for the SPOT Trace?
For optimal performance, please try and utilize SPOT in locations with a clear view of the sky with the logo side up. For more information, please refer to the chart linked HERE .
Rechercher des questions et réponses sur SPOT Trace
TÉLÉPHONE
L'assistance par téléphone est disponible du lundi au vendredi, 8h00 - 17h00 HNE.Veuillez avoir votre NIP quand vous appelez.
La confirmation du NIP n'est pas possible par la voix. Veuillez insérer votre NIP sur le clavier de votre téléphone.
Votre numéro d'identification, NIP, est disponible dans votre compte en cliquant sur PARAMÈTRES ET FACTURATION.
1 (866) 651-7768
1 (985) 327-7511
Clavardez avec un Agent
L'assistance par clavardage est disponible en anglais. Les autres langues sont prises en charge par traduction automatique.Les annulations de service et les paiements ne sont pas pris en charge par le clavardage.
Le clavardage est disponible du lundi au vendredi, de 8h00 à 19h00 HNE.
L'assistance par clavardage n'est disponible qu'avec Chrome, Edge, Firefox, Opera et Safari.